달우

read/write (rw) Software can read and write to these bits.
read-only (r) Software can only read these bits.
write-only (w) Software can only write to this bit. Reading the bit returns the reset value.


read/clear (rc_w1) Software can read as well as clear this bit by writing 1. Writing ‘0’ has no effect on the bit value.
1을 입력하면 클리어. 0은 아무 효과 없음.

read/clear (rc_w0) Software can read as well as clear this bit by writing 0. Writing ‘1’ has no effect on the bit value.
0을 입력하면 클리어. 1은 아무 효과 없음.

read/clear by read (rc_r) Software can read this bit. Reading this bit automatically clears it to ‘0’.
Writing ‘0’ has no effect on the bit value.
읽으면 자동으로 0으로 클리어. 0을 대입하면 아무 효과 없음.

read/set (rs) Software can read as well as set this bit. Writing ‘0’ has no effect on the bit value.
읽기, 설정 가능. 0을 대입하면 아무 효과 없음.
(설정이 가능하다고 하는데 어떻게 설정이 가능한지는 모르겠습니다.)

read-only write trigger (rt_w) Software can read this bit. Writing ‘0’ or ‘1’ triggers an event but has no effect on the bit value.

toggle (t) Software can only toggle this bit by writing ‘1’. Writing ‘0’ has no effect.


Reserved (Res.) Reserved bit, must be kept at reset value.
예비(보류, 남겨둔) 비트, 리셋값으로 보존.